You have no items in your shopping cart.
Cupramine™ effectively eradicates Oodinium, Cryptocaryon, Amyloodinium, Ichthyophthirius, and other ectoparasites of both freshwater and marine fish. It is superior to copper sulfate, chloride & citrate: it is non-acidic, less toxic to fish, remains in solution, and does not contaminate the filter bed. It is superior to chelates: it is fully charged (ionic), active at low concentrations, and is removable with carbon.
Why It's Different
There is more than a four-fold concentration gap between the minimal therapeutic dose (0.2 mg/L) and the toxic dose (0.8 mg/L). Cupramine™ is easily removable with chemical filtration. It is highly effective and safe in freshwater as well as marine water..
Types of Infection Treated
Parasitic
Fungal
Bacterial
Viral
Cupramine
Directions
Remove all invertebrates. Turn off UV sterilizer; remove chemical filtration. If the bottle has a dropper cap, use 20 drops (1 mL) per 40 L (10.5 gallons*) the first day, wait 48 hours, then repeat. On non-dropper caps, each inner ring is 1 mL. In freshwater use half dose. Final copper concentration is 0.5 mg/L (0.25 mg/L in freshwater). Leave at this concentration for 14 days. Do not redose without testing (MultiTest: Copper™). Do not use in conjunction with any other medication. If tank has ever been treated with an ionic copper (e.g. copper chloride, sulfate or citrate), test copper level after initial dosing. Although most fish tolerate Cupramine™ to 0.8 mg/L, it is not advisable to exceed 0.6 mg/L copper. Remove with carbon or CupriSorb™.
In case of eye exposure, promptly & thoroughly wash eyes with water & seek medical attention.
Why It's Different
There is more than a four-fold concentration gap between the minimal therapeutic dose (0.2 mg/L) and the toxic dose (0.8 mg/L). Cupramine™ is easily removable with chemical filtration. It is highly effective and safe in freshwater as well as marine water..
Types of Infection Treated
Parasitic
Fungal
Bacterial
Viral
Cupramine
Directions
Remove all invertebrates. Turn off UV sterilizer; remove chemical filtration. If the bottle has a dropper cap, use 20 drops (1 mL) per 40 L (10.5 gallons*) the first day, wait 48 hours, then repeat. On non-dropper caps, each inner ring is 1 mL. In freshwater use half dose. Final copper concentration is 0.5 mg/L (0.25 mg/L in freshwater). Leave at this concentration for 14 days. Do not redose without testing (MultiTest: Copper™). Do not use in conjunction with any other medication. If tank has ever been treated with an ionic copper (e.g. copper chloride, sulfate or citrate), test copper level after initial dosing. Although most fish tolerate Cupramine™ to 0.8 mg/L, it is not advisable to exceed 0.6 mg/L copper. Remove with carbon or CupriSorb™.
In case of eye exposure, promptly & thoroughly wash eyes with water & seek medical attention.
